Twin TempSpike TP962

Yes, absolutely. The Twin TempSpike is designed to be truly wireless from start to finish. Here's how it works:

Probe to Booster: The temperature probe itself is completely cord-free. It communicates wirelessly via Bluetooth to the included rechargeable signal booster.

Booster to Phone: The booster then connects seamlessly to your smartphone or tablet through a standard Bluetooth connection, allowing you to monitor your cook remotely in real-time through the TempPro app.

No wires are needed between the probe and booster, or between the booster and your phone. That’s true wireless freedom whether you're grilling in the backyard or cooking indoors.

The Twin TempSpike TP962 truly wireless meat thermometer features dual wireless probes for monitoring two pieces of meat at the same time, all through a Bluetooth 5.2 connection with 500ft wireless range and high accuracy.

The Bluetooth range is up to 500 ft (150 m) in an open area without obstructions. Walls, metal cooker lids, and electromagnetic interference may reduce the actual range.

Yes. The stainless-steel probes are heat-resistant and food-grade safe, designed to remain in the meat throughout the cooking process, even in high-temperature grills, ovens, or smokers.

The ambient temperature sensor of the Twin TempSpike TP962 probe can typically withstand temperatures from 14˚F to 572˚F (-10˚C to 300˚C). This makes it suitable for most cooking environments, including grilling, roasting, smoking, and oven baking.

Make sure the probe is inserted deeply enough during use, at least to the depth ring near the handle, or until only the handle is exposed. This helps protect the probe and maintain long-term durability. Inadequate insertion depth may damage the probe.

Absolutely. The Twin TempSpike TP962 is ideal for grills, smokers, ovens, air fryers, and even sous-vide cooking, making it a versatile choice for all your indoor and outdoor cooking needs.

The TP962 has an accuracy of ±1.8°F (±1.0°C) from 14°F to 212°F (-10°C to 100°C). Outside that temperature range, the specified accuracy is ±2%.

Yes. The free TempPro app lets you set custom alerts, track real-time temperatures, and view cooking progress with intuitive graphs, so you never overcook or undercook your food.

Each probe provides 36 hours or more of use after a full charge. The included USB-C cable charges the booster, and the booster charges the probes when they are placed in their charging slots.

The box contains as follows:

• a wireless probe with black handle;
• a wireless probe with white handle;
• a booster;
• a USB-C charging cable;
• a cleaning brush
• a cover;
• a Quick Start Guide for easy setup.

Yes. Twin TempSpike TP962 is a strong best meat thermometer for two meats at once, especially for users who want to cook multiple cuts simultaneously with accurate monitoring.

It is ideal for BBQ sessions where you are grilling or smoking different meats at the same time, such as brisket and ribs or chicken and steak. This makes it a great fit for BBQ enthusiasts and multitask cooks who want full control over multiple temperatures without switching devices.

If you think your probe may be giving inaccurate readings, you can verify its accuracy using the following methods:

Room Temperature Test
Leave the probe at room temperature without inserting it into any food or surface. Compare the reading to your home thermostat to see if it is reasonably close.

Note: Handling the probe or standing very close to it may slightly increase the reading by a few degrees, but the difference should be minimal.

Boiling Water Test
Bring a pot of water to a rolling boil. Without removing it from heat, place the tip of the probe into the water, making sure it does not touch the sides or bottom of the pot. The reading should be within 1-2°F of 212°F (100°C).

Note: The boiling point of water decreases at higher elevations. For every 500 ft increase in elevation, the boiling point drops by approximately 0.9°F. For example, at 4,000 ft, water typically boils at around 205°F (96°C).

Step 1: Fully charge the booster and both probes.

Step 2: Remove at least one probe from the booster and turn on the booster.

Step 3: Enable Bluetooth on your smartphone.

Step 4: Open the official mobile app and tap “Add Device.”

Step 5: Select the TP962 from the device list and follow the on-screen instructions.

The probes and booster are pre-paired at the factory, so you normally do not need to press and hold the S button during initial app setup.

Only use this procedure if a probe is not showing a temperature reading on the booster.

Step 1: Make sure the probe has sufficient battery power.

Step 2: Remove the probe from the booster.

Step 3: Press and hold the S button on the booster for approximately 3 seconds.

Step 4: Wait until the probe temperature appears on the booster display.

One booster can pair with one black probe and one white probe. It cannot pair with two probes of the same color.

If your TP962 Twin TempSpike is not charging or being recognized by the booster, the issue may be caused by dirty or oxidized charging contacts. Try the following steps to resolve it:

1. Clean the Charging Contacts
Check the charging ports on both the probes and the booster to ensure they are clean and making proper contact. Dirt or debris can block charging and cause connection issues.

* Use a toothpick or an old toothbrush to gently clean the contacts.
* Make sure all contact points are free of buildup.

2. Remove Oxidation on the Booster
Over time, the charging contact on top of the booster may develop oxidation, which can interfere with charging.

* Lightly polish the contact using sandpaper, a wool cloth, or a rough sponge.
* This helps restore a solid electrical connection.

3. Reset and Re-pair the Booster
After cleaning, you may need to reset the booster and re-pair the probes:

1）Ensure the probes have been charging for at least 1 hour so they have sufficient battery.
2）Remove the probes from the booster.
3）Press and hold the "S" button on the booster for 10 seconds until you hear a beep, this will reset the booster.
4）With the probes still removed, press and hold the "S" button again for 3-4 seconds to enter pairing mode and reconnect the probes.

Once completed, your probes should charge properly and reconnect to the booster.

Buying directly from TempPro ensures you get the best value, full product support, and exclusive benefits you won’t find elsewhere.

• Authentic products, guaranteed: Every order from our official website is 100% genuine and covered by full quality assurance.
• Exclusive deals & bundles: Access special promotions, discounts, and product bundles available only on TempPro.com.
• Extended 3-year warranty: Register your product on TempPro.com to activate an extended three year limited warranty.
• Fast & flexible shipping options: Enjoy free standard shipping on a order over $30 (2-5 business days). Need it sooner? Choose expedited 1-day or 2-day delivery at checkout.
• Dedicated customer support: Our support team is here to help with orders, product setup, troubleshooting, returns, and anything you need after purchase.

INSTRUCTION MANUAL HERE